Instruction manual

Section 3: Operation and Configuration
Page 3-70 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Advanced Mode - Head check count setting
Onscreen
message
Setting the count of head check.
Use ↑ and ↓ keys to change setting value and
press ENTER.
The setting range is from 0001 to 9999.
The default setting is “0001”.
This message is displayed only when [HEAD
CHECK] is set to “ENABLE” and [HEAD CHECK
MODE] is set to “CHECK PAGE”.
Operation
button
Button Description
↓↑ Enters setting value.
ENTER Saves the setting and goes to the [SELECT LAN-
GUAGE] screen.
CANCEL Goes to the [HEAD CHECK MODE] screen with-
out saving the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Display Advanced Mode - Display language setting
Onscreen
message
Selecting the language to be displayed on the
LCD screen.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
The default setting is ENGLISH.
Operation
button
Button Description
↓↑ Moves the cursor.
ENTER Saves the setting and goes to the [PROTOCOL
CODE] screen.
CANCEL Goes to the [HEAD CHECK] screen without sav-
ing the value.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
0001
HEAD CHECK
PAGE NO.
㡴㦻崭
SELECT LANGUAGE
ENGLISH