Instruction manual

Section 3: Operation and Configuration
Page 3-68 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Advanced Mode - Head check range setting
Onscreen
message
Setting head check range.
Use ← and → keys to move the cursor and press
ENTER.
"NORMAL" : Checks the print area.
"BARCODE" : Checks the barcode printed area
only.
The default setting is “NORMAL”.
This message is displayed only when [HEAD
CHECK] is set to “ENABLE”.
Operation
button
Button Description
←, → Moves the cursor.
ENTER Saves the setting and goes to the [HEAD CHECK
MODE] screen.
CANCEL Goes to the [HEAD CHECK] screen without sav-
ing the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
HEAD CHECK
NORMAL
BARCODE