Instruction manual

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-65
3.3 LCD MESSAGE DETAILS (cont’d)
Display Advanced Mode - Sensor type setting
Onscreen
message
Selecting pitch sensor type.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
"GAP" : GAP sensor is enabled.
"I-MARK" : I-Mark sensor is enabled.
The default setting is "I-MARK".
Operation
button
Button Description
↓, ↑ Moves the cursor.
ENTER Saves the setting and goes to the [CHECK
MEDIA SIZE] screen.
CANCEL Goes to the [PITCH SENSOR] screen without
saving the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
Display Advanced Mode - Media size check setting
Onscreen
message
Enabling/Disabling the check function of media
size.
Use ← and → keys to move the cursor and press
ENTER.
"ENABLE" : Media size check is ON.
"DISABLE" : Media size check is OFF.
The default setting is "DISABLE".
Operation
button
Button Description
←, → Moves the cursor.
ENTER Saves the setting and goes to the [COMMAND
ERROR DISPLAY] screen.
CANCEL Goes to the [SENSOR TYPE] screen without sav-
ing the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
SENSOR TYPE
I-MARK
GAP
DISABLE
CHECK MEDIA SIZE
ENABLE