Instruction manual

Section 3: Operation and Configuration
Page 3-62 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
3.3.1.9 Advanced Mode
Display Interface Mode - Password entry
Onscreen
message
Entering password.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor.
Enter the password set in Service Mode.
This message is displayed only when [SET
PASSWORD] is set to “ON” in Service Mode.
Operation
button
Button Description
↓, ↑ Enters password.
←, → Moves the cursor.
ENTER Saves the setting and goes to the [BCC CHECK]
screen.
CANCEL Goes to the [PROTOCOL] screen without saving
the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
0000
PASSWORD