Instruction manual

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-59
3.3 LCD MESSAGE DETAILS (cont’d)
Display Interface Mode - Item number check setting
Onscreen
message
Setting item number check function.
Use ← and → keys to move the cursor and press
ENTER.
"ENABLE" : Item number check function is ON.
"DISABLE" : Item number check function is OFF.
The default setting is "DISABLE".
This screen is displayed only when "STATUS5" is
selected in [PROTOCOL].
Operation
button
Button Description
←, → Moves the cursor.
ENTER Saves the setting and goes to the [BCC CHECK]
screen.
CANCEL Goes to the [PROTOCOL] screen without saving
the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
DISABLE
ENABLE
ITEM NO CHECK