Instruction manual

Section 3: Operation and Configuration
Page 3-48 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Interface Mode - LAN port number 3 setting
Onscreen
message
Setting LAN port number 3.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor to an input
item
The default setting is "09100".
Setting range is from "00000" to "65535".
[Important] Changed setting becomes effective at
next power-on.
You cannot assign the number currently
used in “PORT NUMBER1” and “PORT
NUBMER2”
Operation
button
Button Description
↓,↑ Enters setting value.
←, → Moves the cursor.
ENTER Saves the setting and goes to the [STATUS
REPLY TIMING] screen.
CANCEL Goes to the [PORT NUMBER2] without saving
the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
PORT NUMBER3
0 9100