Instruction manual

Section 3: Operation and Configuration
Page 3-44 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Interface Mode - LAN subnet mask setting
Onscreen
message
Setting the subnet mask for LAN and Wireless
LAN.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor to an input
item.
The default setting is " 0. 0. 0. 0".
[Important] Changed setting becomes effective at
next power-on.
Operation
button
Button Description
↓,↑ Enters setting value.
←, → Moves the cursor.
ENTER Saves the setting and goes to the [GATEWAY
ADDRESS] screen.
CANCEL If “ENABLE” is selected in [RARP SETTING], it
goes to the [RARP SETTING] screen without
saving the setting.
If “DISABLE” is selected in [RARP SETTING], it
goes to the [IP ADDRESS] screen without saving
the setting.
FUNCTION Goes to the [ONLINE MODE] screen without sav-
ing the setting.
0. 0. 0. 0
SUBNET MASK