Instruction manual

Section 3: Operation and Configuration
Page 3-40 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Interface Mode - Interface port setting
Onscreen
message
Selecting communication port type.
Use ← and → keys to move the cursor and press
ENTER.
"MAIN" : Goes to [INTERFACE PORT].
"SUB" : Goes to [INTERFACE PORT].
The default setting is "MAIN".
Operation
button
Button Description
→, ← Moves the cursor.
ENTER "MAIN" : Goes to the [INTERFACE PORT]
screen.
"SUB" : Goes to the [INTERFACE PORT] screen.
CANCEL Goes to the [INTERFACE SETTING] screen.
FUNCTION Goes to the [ONLINE MODE] screen.
Display Interface Mode - Interface selection
Onscreen
message
Selecting interface type.
Use ← and → keys to move the cursor and press
ENTER.
"USB" : Goes to the USB interface setting.
"LAN" : Goes to the LAN interface setting.
"RS-232C" : Goes to the RS-232C setting.
The default setting is "USB".
Operation
button
Button Description
←, → Moves the cursor.
ENTER "USB" : Goes to the USB setting.
"LAN" : Goes to the LAN setting.
"RS-232C" : Goes to the RS-232C setting.
CANCEL Goes to the input device setting screen.
FUNCTION Goes to the [ONLINE MODE] screen.
NO
MAIN SUB
INTERFACE PORT
NO
INTERFACE PORT
USB
RS-232C