Instruction manual

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-39
3.3 LCD MESSAGE DETAILS (cont’d)
3.3.1.7 Interface Mode
Display Interface Mode -Password entry
Onscreen
message
Entering password.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor.
Enter the password set in Service Mode.
This message is displayed only when "SET
PASSWORD" is set to "ON" in Service Mode.
Operation
button
Button Description
↓, ↑ Enters password.
→, ← Moves the cursor.
ENTER Verifies the entered password.
Goes to the input device setting screen after veri-
fying the password.
CANCEL Goes to the ONLINE MODE screen.
FUNCTION Goes to the ONLINE MODE screen.
Display Interface Mode - Interface board setting
Onscreen
message
Selecting whether or not to change interface
board settings.
Use ← and → keys to move the cursor and press
ENTER.
"YES" : Goes to the [INTERFACE PORT] screen.
"NO" : Goes to the [ONLINE MODE] screen.
The default setting is "NO".
Operation
button
Button Description
→, ← Moves the cursor.
ENTER "YES" : Goes to the [INTERFACE PORT] screen.
"NO" : Goes to the [ONLINE MODE] screen.
CANCEL Goes to the input device setting screen.
FUNCTION Goes to the [ONLINE MODE] screen.
0000
PASSWORD
INTERFACE SETTING
YES
NO