Instruction manual

Section 3: Operation and Configuration
Page 3-36 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display User Mode - Adjustment of cut position
Onscreen
message
This adjusts the base point for paper cutting.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor and select
an input item.
Can be set by 1 dot. The default setting is “+0000
dot” regardless of print density.
Setting range: ±0 to 0045
Operation
button
Button Description
↓, ↑
Enters setting value.
Move the cursor to + and - for its switch over.
→, ← Moves the cursor.
ENTER Saves the setting, and goes to the ZERO SLASH
screen.
CANCEL Goes to the PITCH OFFSET LOWER HEAD
screen without saving the setting.
FUNCTION Goes to the ONLINE MODE screen, without sav-
ing the setting.
CUTTER OFFSET
+0000 dot