Instruction manual

Section 3: Operation and Configuration
Page 3-32 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display User Mode - VR setting
Onscreen
message
This screen indicates the VR setting values on
the main PCB.
It displays the following adjustment values.
PITCH: It shows the value of print offset volume
on both upper and lower surfaces.
OFFSET: This shows the value of print offset vol-
ume on both upper and lower surfaces.
DARKNESS: This shows the value of darkness
volume.
Operation
button
Button Description
ENTER Goes to the PRINT SPEED screen.
CANCEL Goes to the SERVICE MODE screen.
FUNCTION Goes to the SERVICE MODE screen.
Display User Mode - Print speed setting
Onscreen
message
This sets print speed.
Use the up and down arrow buttons to change
setting value and press ENTER.
The default value is 06 IPS.
Operation
button
Button Description
↓, ↑ Enters setting value.
ENTER Saves the setting and goes to the PRINT DARK-
NESS UPPER HEAD screen.
CANCEL Goes to the OFFSET VOLUME screen without
saving the setting.
FUNCTION Goes to the ONLINE MODE screen without sav-
ing the setting.
OFFSET VOLUME
PITCH +0.00 +0.00
OFFSET +25 mm
DARKNESS 50
06 IPS
PRINT SPEED