Instruction manual

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-31
3.3 LCD MESSAGE DETAILS (cont’d)
3.3.1.6 User Mode
Display Adjustment screen - Darkness setting
Onscreen
message
This adjusts print darkness.
Use the arrow buttons to change the setting value
and press ENTER.
The setting range is from 00 to 99 and the default
setting is 50.
Operation
button
Button Description
↓, ↑ Enters setting value.
ENTER Saves the setting and goes to the PITCH POSI-
TION screen.
CANCEL Goes to the OFFLINE screen without saving the
setting.
FUNCTION Goes to the OFFLINE screen without saving the
setting.
Display User Mode - Password entry
Onscreen
message
This enters the password.
Use the up and down arrow buttons to change
setting value and press ENTER.
Use the left and right arrow buttons to move the
cursor.
Enter the password set in Service Mode.
This message is displayed only when SET PASS-
WORD is set to ON in Service Mode.
Operation
button
Button Description
↓, ↑ Enters password.
→, ← Moves the cursor.
ENTER Verifies the entered password.
Goes to the PRINT SPEED screen after verifying
the password.
CANCEL Goes to the ONLINE MODE screen.
FUNCTION Goes to the ONLINE MODE screen.
DARKNESS
50
0000
PASSWORD