Instruction manual

Section 3: Operation and Configuration
Page 3-30 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
Display Adjustment screen - Adjustment of print start position on the lower surface
Onscreen
message
This adjusts the print position on the lower sur-
face.
Use the arrow buttons to change setting value
and press ENTER.
The setting value can be adjusted by ±0.25 mm
regardless of print density.
The setting range is ±3.75 mm and the default
setting is +0.00 mm.
Operation
button
Button Description
↓, ↑ Enters setting value by ±0.25 mm.
ENTER Saves the setting and goes to the OFFSET POSI-
TION screen.
CANCEL Goes to the OFFLINE screen without saving the
setting.
FUNCTION Goes to the OFFLINE screen without saving the
setting.
Display Adjustment screen - Adjustment of offset (cut/tear-off) position
Onscreen
message
This adjusts the offset (cut/tear) position.
Use the arrow buttons to change setting value
and press ENTER.
The setting value can be adjusted by ±0.25 mm
regardless of print density.
The setting range is ±3.75 mm and the default
setting is +0.00 mm.
Operation
button
Button Description
↓, ↑ Enters setting value by ±0.25 mm.
ENTER Saves the setting and goes to the Darkness
screen.
CANCEL Goes to the OFFLINE screen without saving the
setting.
FUNCTION Goes to the OFFLINE screen without saving the
setting.
mm
+0.00
PITCH POSITION
LOWER
mm
+0.00
OFFSET POSITION