Instruction manual

Section 3: Operation and Configuration
GY412 Operator Manual Page 3-1
3
OPERATION AND CONFIGURATION
Before using the printer, it is best to read this manual thoroughly. Otherwise, you may disturb default settings
on which the instructional procedures in this manual are based.
Most of the printer’s settings are controlled via standard SBPL commands or by using the provided SATO
Utilities Tool application.
Some printer settings may be manually configured via the POWER, and FEED/LINE buttons and/or via the
potentiometers located on the main PCB. Remove the covers in order to access the potentiometers when you
need to adjust something.
All of the printer’s buttons, and potentiometers are used either singularly, or together, to perform configuration
activities. The instructions to these operations are described in this section.
There are DIP switches on the Main PCB. However, they are reserved for a function enhancement, and they
are not usable.