Instruction manual

Section 8: Appendix
Page 8-30 GY412 Operator Manual
8.10 PRINT OPERATION SEQUENCE (cont’d)
Note:
• The above is the base position when the I-mark sensor is selected.
•
ིཱ
The upper head is up.
The lower head is down.
Backfeed motion starts.
Position adjustment at the top
of print position.
Up
Down
(2) Timing chart
Label feed
Label cut
Upper/Lower
heads check
Printer motion
Prints the 1
s
t
label (Lower)
Prints the 1
s
t
label (Upper)
Power ON
Backfeed
Upper head
motion
Lower head
motion
Backfeed
Prints the 2
nd
label (Lower)
Label feed to
cut position