Instruction manual

Section 7: Interface Specifications
Page 7-8 GY412 Operator Manual
Communication
settings
The following items can be set through the interface mode of the printer.
Item Setting range
Protocol
STATUS3
STATUS4 (Cyclic response mode)
STATUS4 (ENQ response mode)(*Default value)
STATUS5
IP address 0.0.0.0 ~ 255.255.255.255
Subnet mask 0.0.0.0 ~ 255.255.255.255
Gateway address 0.0.0.0 ~ 255.255.255.255
DHCP protocol Enable / Disable
RARP protocol Enable / Disable
Root password Optional alphanumeric character string (16-
letter)
Maximum receive
buffer capacity
2.95 MB
Near full occurred
Near full released
0 MB
2.95 MB
Remaining 0.95 MB
Remaining 1.95 MB