Instruction manual

Section 6: Basic Specifications
Page 6-10 GY412 Operator Manual
6.1 PRINTER BASIC SPECIFICATIONS (cont’d)
ITEM DESCRIPTION
Standard functions
(1) Status return function
(2) Graphic function
(3) Sequential number function
(4) Form overlay function
(5) Custom character registration function
(6) Character correction function
(7) Black/white inversion function
(8) Ruled line function
(9) Dump list function
(10) Format registration function
(11) Outline function
(12) Outline modification function
(13) Label skip function
(14) Zero slash switching function
(16) Auto loading function
(17) Label saving function
(18) Label discharging function
* Label saving function: If feeding the first label automatically, the print data will be
printed on the first label. To print on the last label, it is necessary to set the label
pitch to 40 mm or more in “Continuous Mode” or “Label cutting during print opera-
tion”. Label pitch of 190 mm or more is required when back feed motion occurs.
ITEM DESCRIPTION
Self-diagnostic function
(1) Thermal head burnout check
(2) Paper end detection
(3) Cover (Thermal head) open detection
(4) Test print
(5) Cutter error