Instruction manual

Section 4: Troubleshooting
GY412 Operator Manual Page 4-13
4.6 TEST PRINT TROUBLESHOOTING
This chapter provides instruction on special printing to identify and resolve specific print problems.
4.4.1 Hex Dump
Allows the operator to determine if there were problems in the downloading of data. The contents of the print
buffer can be examined using the Hex Dump Mode. In the left column, each line of data received is
numbered. The center column provides the data in hexadecimal format. And in the right column, the same
data are provided in the ASCll format. Refer to Section 3: Operation and Configuration for more details to
perform this activity.
4.4.2 Test label printing
Allows the operator to identify specific problems regarding mechanical performance and setup. The test label
is designed to assist in the identification of print problems. Refer to Section 3: Operation and Configuration
for more details to perform this activity.