Instruction manual

Section 3: Operation and Configuration
Page 3-74 GY412 Operator Manual
3.3 LCD MESSAGE DETAILS (cont’d)
3.3.1.10 HEX Dump Mode
Display HEX Dump Mode - Password entry
Onscreen
message
Entering password.
Use ↑ and ↓ keys to change setting value and
press ENTER.
Use ← and → keys to move the cursor.
Enter the password set in Service Mode.
This message is displayed only when [SET
PASSWORD] is set to “ON” in Service Mode.
Operation
button
Button Description
↓, ↑ Enters password.
→, ← Moves the cursor.
ENTER Verifies the entered password.
Goes to the [SELECT DUMP DATA] screen after
verifying the password.
CANCEL Goes to the [ONLINE MODE] screen.
FUNCTION Goes to the [ONLINE MODE] screen.
Display HEX Dump Mode - Selection of dump data
Onscreen
message
Selecting the data for dump printing.
Use ↑ and ↓ keys to move the cursor and press
ENTER.
“RECEIVE DATA” : Prints the received data.
“RECEIVE BUFFER” : Prints the received print
data(1 item).
You cannot select “RECEIVE BUFFER” when
there is no receive data available.
The screen when entering HEX Dump Mode is
the same as that of Normal Mode except one icon
Operation
button
Button Description
↓, ↑ Moves the cursor.
ENTER Goes to HEX Dump Mode.
CANCEL Goes to the [ONLINE MODE] screen.
FUNCTION Goes to the [ONLINE MODE] screen.
0000
PASSWORD
RECEIVE DATA
SELECT DUMP DATA
RECEIVE BUFFER