Specifications

4-30

Using LAN board in Windows NT 4.0, Windows 2000 and Windows XP

SATO Users Manual

Print Using NetBEUI, NetBIOS over TCP/IP of Windows 2000

NOTE

Follow the steps shown below to print from Windows 2000 using NetBEUI, NetBIOS over

TCP/IP protocol.

Verify Network Configuration

Click Start, then Settings, then Control Panel, then Network and Internet Connection.

Open Properties of Local area connection.

Verify NetBEUI protocol is added.

- If NetBEUI is not in the component list, click Install, then Protocol, then NetBEUI protocol.

Make sure that NetBEUI protocol and Microsoft network shared service are added to the

Network of the Windows 2000.

Verify that Microsoft Network Client is added.

-If Microsoft Network Client is not in component list, click Install, then Client, then Microsoft

Network Client.

Verify the PC network configuration

Build NetBEUI, NetBIOS over TCP/IP printing environment

- Make sure to install printer driver before you start using LAN board.

- For further information on NetBEUI, NetBIOS over TCP/IP configuration, refer to Chapter 7.

NOTE