Specifications

4-27
Using LAN board in Windows NT 4.0, Windows 2000 and Windows XP
SATO Users Manual
Print Using NetBEUI, NetBIOS over TCP/IP of Win-
dows NT 4.0 and Windows 2000
Build NetBEUI, NetBIOS over TCP/IP printing environment
Verify the PC network configuration
1.
Verify the Network Configuration (NetBEUI)
Make sure that Workstation, NetBIOS interface and NetBEUI protocol are added to
Network of Windows NT 4.0.
3.
2.
Click Start, then Settings, then Control Panel.
Double-click Network.
Verify that Workstation and NetBIOS interface are added to the Services.
- If Workstation is not in the Network Service list, click Add, then select Workstation to add
Workstation.
4.
Verify NetBEUI is added to Protocol.
- If NetBEUI is not in the list, click Add, then select NetBEUI from Network protocol.
Print Using NetBEUI, NetBIOS over TCP/IP of Windows NT 4.0
Follow the steps shown below to print from Windows NT 4.0, Windows 2000 and Windows
XP environment using NetBEUI, NetBIOS over TCP/IP protocol.
- Make sure to install printer driver before you start using LAN board.
- For further information on NetBEUI, NetBIOS over TCP/IP configuration, refer to Chapter 7.
NOTE
NOTE
NOTE