Specifications

4-10
Using LAN board in Windows NT 4.0, Windows 2000 and Windows XP
SATO Users Manual
Configure the wireless settings
8.
When connecting in Infrastructure mode, the authentication settings on the screen change.The
authentication configuration screens are shown below.
(A) When not using authentication.
Select Open System
Select Use WEP.
Click on the Key Index button and enter the value for the WEP Key.
(Refer to “WEP key setup” for the configuration method.)
(B) WEP Authnitcation
WEP Key is used
Select Use WEP.
Click on the Key Index button and enter the value for the WEP Key.
(Refer to “WEP key setup” for the configuration method.)
802.1x Authentication
Click 802.1x Authentication.
(Refer to “802.1x Authentication “ for the configuration method.)
802.1x Authentication
Click 802.1x Authentication.
(Refer to “802.1x Authentication “ for the configuration method.)
Select Shared Key