Specifications

3-8Using LAN board in Windows 95/98/Me

SATO Users Manual

Check “Use WEP”, and the following screens will be displayed when the “Key 1”-” Key(s) 4"

button is selected (the screen shown blow is for a “Key Size” of 64 bits).

If the WEP key has already been configured, please select either “ASCII” or “HEX” after

pushing the “Change” button, and enter the WEP key.

The number of characters entered changes with “Key Size.”

64bit : ASCII 5characters HEX 10 characters

128bit : ASCII 13 characters HEX 26 characters

Click Change.

Selecting “802.1x Authentication” will display the following screen.

Since configuration items change with authentication systems, only the item that need to be

configured will be displayed.

- Enable or disable “802.1x Authentication”

- Select Authentication.

- Enter the 802.1x user name

- Please choose NO, when manually entering the WEP key.

- Select YES when the WEP key is obtained from Access Point.

[WEP Key Setup]

[802.1x Authentication setup]