Specifications

8-9Questions & Answers
SATO Users Manual
Problems in NetWare
LAN board can not establish the connection with NetWare
CHECK1
From the AdminManager or the LAN board Web page, verify the proper configuration
for "Frame Type", "Mode".
-The automatic changeover of NetWare operation mode on LAN board may require some
time depending on the operating environment.
NOTE
CHECK2
When two or more LAN boards are used, make sure that the same printer name
(NetWare printer name) is not duplicated.
LAN board can not establish the connection with NetWare server (RPRINTER
mode)
CHECK1
Click Print server, then Printer list, then Current status on NetWare server to verify
if the LAN board is operating properly.
CHECK2
Make sure that the Print Server Name specified on the LAN board is the same as that
of the print server operating on your file server.