Specifications

1-5About LAN board
SATO Users Manual
Dip Switch Operation
The following list describes the function of each switch.
1 OFF Normal operating setting
2 OFF Normal operating setting
ON Initialization/Reset to factory default upon power up
3 OFF Normal operating setting
ON Configuration report upon power up
Prints Diagostic report upon power up
4OFF
ON
Wireless Mode Setting
- Make sure to switch off printer when operating dip switches.
- Diagnostic/configuration report can not be printed depending on your printer.TIP
<Initialization/Reset to factory default>
1. Switch off printer.
2. Switch on the dip switch No. 2.
3. Switch on printer and wait until the printer is ready for printing.
4. Switch off printer.
5. Switch off the dip switch No. 2.
<Configuration report / Diagnostic report>
1. Switch off printer.
2. Switch on the dip switch No. 3.
3. Switch on printer and wait until configuration report is printed and diagnostic report is
printed.
4. Switch off printer.
5. Switch off the dip switch No. 3.