Specifications

8-4Questions & Answers
SATO Users Manual
- Send PING command from MS-DOS to verify the proepr communication between
your PC and other PCs in the network.
- Verify if LAN board has been initialized to factory default.
* For the procedure to initialize LAN board to factory default, refer to chapter 1.
- DHCP or RARP server may exist in the network.
* An inappropriate IP address may have been assigned to LAN board by Router or
the servers. Configure IP address in a local environment where router or server do
not exist (one PC, one HUB, one printer and one LAN board exist in the environment).
- LAN board and the PC you are using for the configuration may not be in the same
segment.
*Verify that LAN board and the PC you are using for the configuration are in the
same segment.
Communication error occurs when configuring IP address
CHECK