Specifications

7-38Functions for Configuration
SATO Users Manual
Set the password that is authenticated when the
print server logs into the file server as a PSERVER
mode. When the password is set for the print server,
the same password must be set to the
corresponding file server. If the print server is
connected to two or more file servers, the same
password must be set to all the file servers.
-
Set the interval for the print server to query the file
server for jobs in units of seconds. Usually the value
should be the default.
4
Bindery
Mode
FSERVER
name
(1-8)
Set the name of the file server primarily connected
to. The print server logs into the file server set here
when operating in PSERVER mode. The print server
searches the file server automatically and logs in if
the value is blank.
-
Set the name of the print server primarily connected
to. This product connects to the print server set here
when operating in RPRINTER mode. This product
searches print server automatically and connects if
the value is blank.
-
Set the timeout value (in units of seconds) for the
print server to determine the end of the job when
operating in RPRINTER mode. Usually the value
should be the default.
10
Net Ware
Item
Explanation
Factory
Default
Web browser
Job management can be performed via NetWare server.
FSERVER name
(1-8)
Password
Job polling interval (sec.)
PSERVER Mode
Job timeout(sec.)
TELNE T
Job timeout(sec.)
Password
Job polling interval
(sec.)
PSERVER name
(1-8)
RPRINTER Config
PSERVER name (1-8)