Specifications

7-34Functions for Configuration
SATO Users Manual
Print server function
General
TCP/IP
Enable/Disable TCP/IP protocol operations. This
has influence on the configuration of Setup Tools,
LPR, FTP, TELNET, SNMP, HTTP and other
protocols over TCP/IP.
ENABLE
Enable/Disable DHCP/BOOTP protocol
operations. DHCP/BOOTP is a protocol, via
which IP address gets assigned by the BOOTP
server or DHCP server. If you use DHCP/BOOTP
server, the DHCP/BOOTP server must be in the
same segment as the print server. This print
server detects DHCP and BOOTP automatically.
If more than 1 address get returned, the IP
address which is returned first will be used.
ENABLE
Enable/Disable RARP protocol operations.
RARP is a protocol, via which IP address gets
assigned by the RARP server. If you use RARP
server, the RARP server must be in the same
segment as the print server.
ENABLE
RARP protocol
TCP/IP protocol
TCP/IP
Item
Explanation
Facory
Default
DHCP/BOOTP
protocol
RARP protocol
Web browser
TCP/IP protocol
TELNET
DHCP/BOOTP
protocol
Please enter the password.(in ASCII TEXT) This
password will be used for configuration changes
via Telnet, Web page and Setup Tools.
-
Please select whether you want to use
HEWLETT PACKARD's
JetAdmin/WebJetAdmin.
YES
General
Factory
Default
Explanation
Item
root password root password
Use HP JetAdmin
Web browser TELNET
Use HP JetAdmin
Web browser/TELNET configuration items