Specifications

1-2About LAN board

SATO Users Manual

TIP

- WPA2 is not supported.

- Atheros SuperG - XR is not supported.

- When running in AdHoc mode, the LAN board operates at the same communication speed as

802.11b.

- When using AES, the network connection between Broadcom's access point and the LAN board

may become unstable.

- DSA certificate for EAP-TLS authentication is not supported.

- When using CKIP and CMIC, the communication speed may slow down because CKIP and

CMIC are processed on the software side.

- LEAP authentication cannot be used with TKIP and AES encryption. Therefore, LEAP cannot be

chosen for WPA authentication mode.

- When using CKIP, the LAN board will always try to connect to an access point even if the wrong

cipher is used. (When using WPA, the LAN board will not connect to an access point if the

wrong cipher is used.)