Specifications

7-21Functions for Configuration
SATO Users Manual
PrinterPort Configuration
Tab Explanation
Factory
Default
BOJ String Specify the string to be transmitted to the printer before
output to the direct output port (lp port). Specify the string
when a control code, etc. needs to be sent before printing.
-
EOJ String Specify the string to be transmitted to the printer after output
to the direct output port (lp port). Specify the string when a
control code, etc. needs to be sent after printing.
-
BOJ String Specify the string to be transmitted to the printer before
output to the port via a Kanji filter (sjis/euc). Specify the
string when a control code, etc. needs to be sent before
printing. (Kanji - double sized character for Japanese)
-
EOJ String Specify the string to be transmitted to the printer after output
to the port via a Kanji filter (sjis/euc). Specify the string
when a control code, etc. needs to be sent after printing.
(Kanji - double sized character for Japanese)
-
Printer
Emulation
Configure to correspond with the PDL(Printer Description
Language). The printing data will be converted to a code that
corresponds to the printer emulation in outputting to the
output port via Kanji filter (sjis/euc). (Kanji - double sized
character for Japanese)
ASC II
Tab Size Specify the number of characters to convert the tab code
(0x09) to half size (single-byte) space (0x20) in outputting
via a Kanji filter. When the value is 0, the tab is not
converted. The value is from 0 to 16. (Kanji - double sized
character for Japanese)
8
Printer Port
Item
euc/sjis Port lp Port