Specifications

7-19Functions for Configuration
SATO Users Manual
Tab Explanation Factory Default
The ID logically differentiates the wireless LAN
network. If the SSID do not match, communication
between two points is not possible, even if they
use the same channel in that specific
communication area. Usage in "Infrastructure"
mode and "Ad hoc" mode.
default
The communication channels are used in "Ad hoc"
mode. It is necessary that the two devices use the
same communication channel.
11
Specify an authentication method.
Open System
Using WEP Setting the use/ non-use of WEP. IN wireless
LAN, Sent and Received Data are encrypted with
WEP key.
DISABLE
Key Size Specify the key size used for WEP. If you select
"64", a WEP Key in size of 5 letters in ASCII and
5-byte in HEX will be created. If you select "128",
a WEP Key in size of 13 letters in ASCII, and 13-
byte in HEX will be crated.
64 bit
Key Index Select a WEP Key number to use.
1
Key (1-4) ASCII Enter the WEP Key in ASCII code.
-
HEX Enter the WEP Key in hexadecimal numerals (00-
FF).
-
802.1x Authentication Specify whether 802.1x Authentication is used or
not.
DISABLE
Authentication mode Specify an Authentication Mode.
EAP-TLS
User Name Specify an 802.1x UserName.
-
Using
WEP
Provide WEP Key Specify whether the WEP key is offered from an
Access Point.
NO
LEAP
Password
Specify the password. This password is only
used for LEAP authentication.
-
Using WEP Setting the use/ non-use of WEP. IN wireless
LAN, Sent and Received Data are encrypted with
WEP key.
DISABLE
Key Size Specify the key size used for WEP. If you select
"64", a WEP Key in size of 5 letters in ASCII and
5-byte in HEX will be created. If you select "128",
a WEP Key in size of 13 letters in ASCII, and 13-
byte in HEX will be crated.
64 bit
Key Index Select a WEP Key number to use.
1
Key (1-4) ASCII Enter the WEP Key in ASCII code.
-
HEX Enter the WEP Key in hexadecimal numerals (00-
FF).
-
Item
Wireless
SSID
Channel
Authentication
WEP Key
Shared Key
802.1x Authentication Setup
Open System
WEP Key