Specifications

7-14Functions for Configuration
SATO Users Manual
Tab
Factory
Default
NetWare Print
Server to be
connected
Set the name of the print server primarily
connected to. This product connects to the
print server set here when operating in
RPRINTER mode. This product searches
print server automatically and connects if
the value is blank.
-
Job Timeout Set the timeout value (in units of seconds)
for the print server to determine the end of
the job when operating in RPRINTER mode.
Usually the value should be the default.
10
PRxxxxxx-Prn1
(Lower 6 digits
of Ethernet
address)
Job management can be performed via NetWare server.
RPRINTER
Set the printer name under print server information within the
NetWare server. It must be the same as the "Printer Name"
registered in the NetWare server.
Printer Name
R
P
R
I
N
T
E
R
S
e
t
u
p
ExplanationItem
NetWare
Printing Method