Specifications

7-4Functions for Configuration
SATO Users Manual
On the AdminManager menu bar, select
Configuration, then Set IP address to start
IP address configuration tool.
- Before assigning an IP address, verify LAN board Ethernet address. The address can be
found on the self-diagnostic print sheet. (e.g. 00:80:92:34:c0:19)
1.
2.
Searching LAN board Using AdminManager
-Restart process of AdminManager may not work depending on printer type.
In that case, switch off and on the printer power.
3.
Enter Ethernet address and IP address of
LAN board to be configured.
Click OK.
NOTE
TIP
Before setting up LAN board, verify that it can be discovered by AdminManager. If not, select
Configuration, then assign an IP address.
Assigning an IP address
Assign an IP address manually.
To validate the IP address, reset LAN board.