Specifications

5-12
Using LAN board in UNIX/Linux Environment
SATO Users Manual
- Depending on UNIX specification, the command may fail to display the printer status correctly.
TIP
2-3 Enable the print queue.
#/usr/lib/accept pboxlp
#/usr/bin/enable pboxlp
2-4 Boot the printer spooler.
#/usr/lib/lpsched
Prepare for printing.
3.
3-1 Use the print command “lp”.
# lp -d pboxlp <Name of print file>
Cancel the print request.
4.
4-1 Use the “cancel” command to cancel the current print job request.
# cancel pboxlp- <job number>
Check the printer status
5.
5-1 Use the “lpstat” to verify the printer status.
# lpstat -p pboxlp
NOTE
-The “lp” following “-orp” represents the name of LAN board remote printer.
-SJIS kanji text data can be directly printed by configuring as below.
#/usr/lib/lpadmin -ppboxsjis -mrmodel -ormpbox
-orpsjis -ocmrcmodel -osmrsmodel -ob3 -v/dev/null
(Specify sjis port)