Table of contents 2006-11-28 Instructions for use GL408e / GL412e Barcode printer Dok-ID: 01867 Read the operating instructions before starting work!
© Sato Europe NV Leuvensestennweg 369 1932 Sint-Stevens-Woluwe, Brussels Internet: www.satoeurope.
GL408e / GL412e Barcode printer Table of contents 2006-11-28 1 General....................................................................................4 1.1 Information on this quick guide ......................................4 1.2 Limitation of liability........................................................4 1.3 Copyright........................................................................5 1.4 Customer Service ..........................................................5 1.
GL408e / GL412e Barcode printer General 1 General 1.1 Information on this quick guide This quick guide provides important information on how to handle the device. Make sure to read this quick guide before using this printer! It is an integral part of the product and must be kept in the immediate vicinity of the device to be available to the operating staff. When transferring the device to third parties, make sure to include this quick guide. 1.
GL408e / GL412e Barcode printer General 1.3 Copyright Treat the operating instructions confidentially. They are only intended for persons working with or on the device. Passing these operating instructions on to third parties without the written consent of the manufacturer is not permitted. NOTE! The contents of these instructions, texts, drawings, pictures and other representations are protected by copyright law subject to industrial property rights. Any misuse is punishable.
GL408e / GL412e Barcode printer General 1.5 Explanation of symbols Warnings In these operating instructions warnings are identified by symbols. These notes are introduced by signal words, which express the severity of a danger. Adhere to these notes and act cautiously in order to avoid accidents, personal injuries and damage to property. DANGER! … indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
GL408e / GL412e Barcode printer Safety 2 Safety This paragraph provides you with an overview of all important safety aspects for optimal protection of personnel as well as safe and trouble-free operation. Disregarding the operating instructions and safety regulations specified in this manual may result in considerable danger. 2.1 Intended use The printer may only be used for printing bar code labels using the printing materials recommended by the manufacturer.
GL408e / GL412e Barcode printer Safety 2.2 Incorrect use The applications listed here may lead to errors, the destruction of the device or injury. Using printing materials other than the specified materials (e.g. inappropriate paper, clothing, cardboard). Inserting foreign objects into the printer. Use of non-permissible accessories. Contact with liquids. Setting up the printer on uneven or slanted surfaces. Exposing the printer to serious vibrations.
GL408e / GL412e Barcode printer Transport and storage Electric current DANGER! Danger to life caused by electric current! Touching conductive parts causes a direct danger to life. Damage to insulations or individual components can cause danger to life. Therefore: – In case of damage to insulation switch off the power supply immediately and have the defective parts repaired. – Work on the electric system must only be carried out by skilled electricians.
GL408e / GL412e Barcode printer Unpacking the printer 4 Unpacking the printer Unpack the printer and check the contents.
GL408e / GL412e Barcode printer Installation 5 Installation Place the printer in a level place If installed in a rough or slanting place, quality printing will not be available. It may cause malfunction and shorten the life of the printer. Use a stable platform Use a stable platform. Do not carry the printer with the media inside. Do not rock the printer. Avoid high heat and humidity Do not install in a place of high temperature or humidity. High temperature or humidity may cause malfunction.
GL408e / GL412e Barcode printer Overview 6 Overview 6.1 Parts and functions 1 2 3 4 Power switch (ON / OFF) Operation panel (display, buttons, LED) Front cover Media cover 1 2 Print head (consumable) Platen roller (consumable) Fig. 1 Printer main body, front Fig.
GL408e / GL412e Barcode printer Overview Fig.
