Specifications

50 DR300
4. Settings Operation Manual
4.5.5 Setting PC Card
Printing format and graphic data can be stored in PC card. 128K,
256K, 512K, 1 M, 2M bytes TYPE 11 PCMCIA memory cards
(JEIDA Ver4.2/ PCMC1A2 equivalent) are available.
Installation.
1. Power off printer and open card cover. There are 2 card slots
available.
2. Insert memory card into the designated slot.
3. Confirm direction of memory card before inserting into the slot.
Take caution not to force the card in reverse direction that may
damage the connector of the memory card as well as the con-
nector on the main PCB.
4. Confirm projection of eject button on the right hand side of the
slot when memory card is inserted properly.
Removal
1. Push the eject button at the right side of the card slot.
2. Remove the slightly ejected memory card.
Caution!
1. Ensure that power is switched oft when installation
and removal of any memory card to prevent any pos-
sible damage to the memory card, connectors and
printer.
2. Close card cover to prevent intrusion of hazardous
objects when no card is in the slot.
Eject
Buttons
2Slots