Specifications

Operation Manual 4. Settings
DR300 41
Stop position adjustment
Correct stop position for dispense mode is the position where label
is 2-3 mm on backing paper. Adjust OFFSET (VR) to obtain correct
stop position. Backwards against printing direction, forward to
printing direction.
Caution!
1. There may be cases the dispenser does not function
properly due to the thickness of labei used.
2. Printing accuracy at peeling is V (Vertical) direction
±1.5mm.
3. Dispenser unit is effective for label pitch 25-181 mm.
However, label size limitation may vary with applica-
tion conditions.
OFFSET VR