Specifications

24 DR300
2. Configuration Operation Manual
Normal Mode
When the printer is switched on, the readout will display the follow-
ing message.
The LCD Panel will display the ONLINE status on the top line of
the display and the bottom line will contain the label quantity (Q)
status. The ONLINE message will be changed to OFF Line when-
ever the print head is opened and closed. As soon as a print job is
received, the Quantity message will indicate the number of labels
to be printed. As soon as the label job begins to print, the display
will indicate the number of labels remaining in the print job that
remain to be printed.
User Mode
To enter the USER mode, perform the following steps:
Print Darkness Setting
There are five Darkness (or heat range) settings. The higher num-
bers represent darker settings. The current setting is indicated by
an underline under one of the range settings.
To change the setting perform the following steps:
STEP PROCEDURE
1. Press the LINE key while powering on
the printer.
2.
After the single audible signal
release the key.
The printer now dis-
plays the USER mode adjustment.
3. Press the FEED key and the printer displays the first USER Mode
(DARKNESS)
STEP PROCEDURE
1.
Use the LINE key to step the
underlined cursor to the desired setting.
2. Once the correct setting is underlined, press the FEED key to
accept the setting and advance to the next adjustment.
ONLINE
Q:000000
OFFLINE
000000
USER
MODE
DARKNESS
L12345D