Specifications

Operation Manual 1. Overview and Specifications
DR300 11
Font Type U - Font W 5 x P 9 (Alphanumeric, notation)
S - Font W 17 x P 17 (Alphanumeric, notation)
M - Font W 24 x P 24 (Alphanumeric, notation)
WB - Font W 48 x P 48 (Alphanumeric, notation)
OCR - A Font W 15 x P 22 (Alphanumeric, notation)
OCR - B Font W 20 x P 24 (Alphanumeric, notation)
**IBM 850 Code Set Table
Print Area Max W 76 mm x P 178 mm (Optional print area expansion)
Label Size Width 25 - 80 mm Pitch 19 - 181 mm
(Label size is inclusive of label web)
Label Thickness 0.1 - 0.26 mm
Interface RS - 232 C (Ready / Busy, Xon / Xoff, Status - 3)
Operation
Panel
Key: LINE Key, FEED Key
LCD: 8 digits x 2 Lines (English character display, Back Lit)
[Only applicabie to Online specification only]
STATUS: 2 - color LED (Red, Green)
Adjustment VR PRINT: Print Darkness
PITCH: Pitch adjustment
OFFSET: Print position adjustment
User Mode 1. Print Darkness
2. Print Speed
3. Vertical Offset
4. Horizontal Offset
Features
Graphics Print, Sequential Numbering, Line / Box, Print
Position Adjustment, Back,- Feed, Tear - Off, Calendar,
Inverse Image, Zero Slash Selection, Non Standard Code
Setting, Hex Dump, Customized Design Character (16 x 16,
24 x 24)
Self Check/
Detection
Head Element Broken, Paper End, Ribbon End, Head
Open,
Memory Card Error, Test Print
Options Touch Screen Unit, Cutter Unit, Dispenser Unit, Rewinder
Unit, PC Card (JEIDA Type 11)
Head Density 8 dots/mm