Specifications

10 DR300
1. Overview and Specifications Operation Manual
Back panel unit
1.3 Specifications
General
Head Density 8 dots/mm
Print Method Thermal Transfer/Direct Thermal
CPU 32-bit RISC CPU
Memory EP-PROM 4Mb x 2
DRAM 512 Kb x 2
Print Speed 75, 100, 125 mm/second(Selectable)
Bar Code Type UPC-A/E, EAN-8, EAN-13, NW 7
Code 39, ITF2/5, Code128, UCC/EAN128, BookLand
Bar Code Ratio 1 : 2, 1 : 2.5, 1 : 3 (Software defined)
Font Expansion 1-9 times (Both horizontally and vertically)
RS-232C
(Serial interface)
Connector
EXT Connector
Connector for external
signal interface
KB
Touch Screen connector
VR1 to VR6
For factory variable resistor
Check pin
For factory adjustment