User`s guide

Section 3: Expanded Memory Commands
Page 3-8 PN 9001106(B) SATO CX400 / CX410
Initialize
Command Structure <ESC>BJFaaaaaaaa
aaaaaaa = Eight character alphanumeric user ID
Example: <ESC>BJFsatocard
Placement: Immediately following the <ESC>CC Memory Area
Select command.
Default: None
Command Function This clears all of the data from Expanded Memory in the specified
memory area and prepares the area to accept data.
Input to Printer <ESC>A
<ESC>CC2<ESC>BJFsatocard
<ESC>Z
Printer Output There is no printer output as a result of this command.
Special Notes 1. You must have the optional Expanded Memory to use this com-
mand. Call your local SATO representative for information.
2. All Expanded Memory must be initialized before it can be used for
the first time.
3. Care should be exercised when using this command as it destroys
any data previously written to the card. It will clear all data from the
card and assign the new ID (“satocard” in the above example).