User`s guide

Section 2: Command Codes
SATO CX400 / CX410 PN 9001106(B) Page 2-49
Print Quantity
Command Structure <ESC>Qaaaaaa
aaaaaa = Total number of labels to print (1-65535)
Example: <ESC>Q500
Placement: Just preceding <ESC>Z, unless <ESC>~ exists, then
preceding that. This command must be present in every
print job.
Default: None
Command Function To specify the total number of labels to print for a given print job.
Input to Printer
< ESC>A
<ESC>H0100<ESC>V0100<ESC>WBSATO
<ESC>Q3
<ESC>Z
Printer Output Three labels containing the data “SATO” will be printed.
Special Notes 1. To cancel a print job, you must turn off the printer.
2. When used with the <ESC>F Sequential Numbering command, the
Print Quantity value should be equal to the total number of labels to
be printed.
3. If you do not specify a Print Quantity, one copy iwill be printed.
4. For this command, leading zeroes do not have to be entered. The
command “Q1” is equivalent to “Q000001”.