User`s guide

Section 2: Command Codes
Page 2-48 PN 9001106(B) SATO CX400 / CX410
SPECIAL NOTES 1. To expand the print length to the maximum limit, the <ESC>EX0
Expanded Print Length command must be used.
2. The print position of a field is affected by both the <ESC>R Rotate and
<ESC>A3 Base Reference Point commands.
3. If any part of an image is placed past the maximum number of dots,
that part of the image will be lost.
4. If you attempt to print where there is no paper, you may damage the
print head.
5. For these commands, the leading zeroes do not have to be entered.
The command “V1” is equivalent to “V0001”.