User`s guide

Section 2: Command Codes
Page 2-20 PN 9001106(B) SATO CX400 / CX410
Continuous Forms Printing
Command Structure None
Command Function The printer locates the end of an adhesive label by sensing the backing
between labels or through the use of an eye-mark (black rectangle on the
reverse side of the backing). It locates the end of a tag from a notch, eye-
mark, or a hole between tags. Both sensors should be disabled when
printing continuous forms by sending the <ESC>CI0 command to disable
the sensor.
Input to Printer <ESC>A
<ESC> CI0
<ESC>H100<ESC>V50<ESC>XMContinuous Forms Printing
<ESC>Q3<ESC>Z
Printer Output
Special Notes 1. If you will be using continuous labels or tags, the printer must be told
to stop feeding in another manner. The length is determined by the
position of the last printed image on the label or tag. The printer will
stop feeding when this last field is finished printing. The length may
be increased with printed spaces (20
H
) if necessary. There is no com-
mand code to control label length.