User`s guide

Section 2: Command Codes
SATO CX400 / CX410 PN 9001106(B) Page 2-13
Printer Output
Special Notes 1. When printing the custom character using the Recall command, the
character is affected by the following commands: Character Expansion
Character Pitch Line Feed, Rotate, Fixed Base Reference Point
2. The characters are stored in volatile memory and must be reloaded if
the printer power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image will
not be printed as specified.