Technical information

CX400 Technical Manual (Rev 1.00)
SATO /ARGOX Technical Documentation
Confidential Information
4
2.5 Graphic
Formats: SATO Hex/Binary
Rotation: 0
o
; 90
o
; 180
o
; 270
o
2.6 Media
Media type :
Direct Thermal - direct thermal paper or vinyl, visible light and infrared scannable label, tag stock, with various
adhesives.
Thermal transfer - all above media, plus thermal transfer paper
Max Label Roll Diameter : 127mm ( 5” )
Label Roll Core Diameter : 19.05 mm ( 0.75” )
Min. Inter-Label Gap : 2 mm ( 0.08” )
Max. Inter-label Gap : 25.4 mm ( 1“ )
Media Sensor:
1. Either “Reflective Sensor” or “Gap/I-mark Sensor” can be selected by user.
2. Located in the left side of Label Guide. In other words, the sensors are moved with the label width.
3. Gap/I-mark Sensor is for the Labels with Die-Cut gap or Notched Index .
Reflective Sensor is for the Labels with Eye-Mark, Die-Cut gap.
2.7 Operating environment
Electrical: AC 90VAC to 250VAC 50-60 Hz
Operating: +5 ~ 38
o
C ( 25 ~ 85 RH, non condensing )
Storage: -20 ~60
o
C( 25 ~ 85 RH, non condensing )
2.8 Physical dimension
Weight : 3.67kg ( Transformer Adaptor Included )
Size : 197mm (7.76”) x 257mm (10.2”) x 164mm (6.5”)
2.9 Communication specifications
SATO CX-400 Label printers send and receive messages through either serial or parallel communication interface.
Printer will automatically monitor these two ports for receiving commands/data from Host.