Technical information

CX400 Technical Manual (Rev 1.00)
SATO /ARGOX Technical Documentation
Confidential Information
32
5. Loose 2 screws( I ) on ‘Printer Bottom’( 39 ).
6. Pull out the front side of “Middle Cover“ (96), then remove it from “Printer Bottom” ( 39 ).
7. Use a proper screw driver ( I type, as sharp as possible ) to loose “Power Switch” which is locked on “Middle Cover”(96).
8. Unplug “Power Switch” from “Power Cords” then take out “Middle Cover” (96 ).
Fig. 8.7