Technical information

CX400 Technical Manual (Rev 1.00)
SATO /ARGOX Technical Documentation
Confidential Information
28
4. Unplug the 2 Print Head cables from the connectors on Print Head to take off the old Print Head.
5. Plug the 2 Print Head cable to the new Print Head.
6. Screw the new Print Head on “Print Head module”(12,13) .
7. Put back new “Print Head module” on “Printer Chassis”(30) with the same way which you released it from “Printer Chassis”
Figure 8.2
8.4.2 Main-Board Replacement
1. Turn off Printer
2. Loose the 2 screws( B ) to take off “Peeler Cover”(75).
Figure 8.3