Technical information

CX400 Technical Manual (Rev 1.00)
SATO /ARGOX Technical Documentation
Confidential Information
27
8.4 Replacement
8.4.1 Printing Head( TPH ) Replacement
CAUTION
The printer electronics are susceptible to static discharge. Wear
an anti-static wrist and attach it to the printer chassis
1. Turn Off Printer
2. Push “Print Head module” and pull it down as the 2 arrows shown in Fig. 9.1 to release “Print Head
module” from “Printer Chassis”(30).
3. Loose the 4 screws( C ) to take out Print Head from “Print Head Module “(12 ,13).
Figure 8.1