Technical information

CX400 Technical Manual (Rev 1.00)
SATO /ARGOX Technical Documentation
Confidential Information
26
8.3 Clearance
CAUTION
The printer electronics are susceptible to static discharge. Wear
an anti-static wrist and attach it to the printer chassis
There are some components need to be clean-up occasionally :
Thermal print head
The debris of thermal paper or ribbon may be remained on the print head. This will cause the printed image
(Characters, Bar Code … )to appear light or faded . To clean the print head, wet a soft paper towel with “isopropyl
rubbing alcohol” and use the damp towel to rub off the dirt on the print head surface .
It is recommended to clean “Print Head” before a new ribbon being loaded.
Platen roller :
If the roller becomes contaminated with grit, label adhesive, or ink, the printing quality may be adversely affected. To
clean the roller , using a clean cloth and alcohol, wipe off any accumulated debris .
Note : Switch off the power before cleaning !